As a mechanical screening device, vibrating screens have been applied in various industries. However, some customers have recently reported that the vibrating screen machine may experience material mixing during screening after a period of use. Below, we will analyze this issue in detail:

1、 Firstly, we need to check the sealing condition of the screen frame. When the vibrating screen is used at the factory, relevant sealing rings will be installed between the screen frame and the screen body to prevent leakage. Due to the heat and friction generated during the screening process of the vibrating screen, the sealing ring may deform or crack and age after long-term use. Therefore, we need to regularly check whether the sealing accessories are damaged. If found, they should be replaced in a timely manner to avoid mixing.

2、 The issue of screen breakage should be known to users who have used vibrating screens that screens are vulnerable parts in vibrating screens. Due to the different materials screened by the user, the wear and tear on the screen mesh also varies. The vibrating screen machine also has a considerable load on the screen mesh during continuous operation, which can cause damage to the screen mesh. This requires careful inspection by the operator during the production process. If the screen mesh is damaged, please replace it in a timely manner to ensure the quality of the screened material.

3、 The motion trajectory of the material on the screening surface, the vibration motor, and the staff will adjust the angle of the heavy hammer according to the characteristics of the screened material before leaving the factory, so as to ensure that customers can select qualified material products during use; However, in special circumstances, the angle of the heavy hammer may change during use, causing the operating trajectory of the screening machine to become shorter and the material to be excluded from the machine without being thoroughly screened. This requires us to adjust the angle of the vibration motor according to the instruction manual of the vibrating screen to ensure the normal operation of the screening machine.